This is topic Gawd Helps us if Non EU for cine. in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=010763

Posted by Mark Todd (Member # 96) on June 13, 2016, 05:15 AM:
 
Just sending a few bits today and it is so easy to buy and sell cine within the EU, no customs and costs, no declarations etc.

That works both ways.

I`m not a fan of leaving anyway but its so handy usually now on EU bits.

I really wonder if the people who say " oh they get all this money " really think any of that will come back to ordinary people if the UK left. No chance.

And even worse what does come back to ordinary people here from the EU coffers will stop. Basically ordinary people will loose out big time if we go.

But my little rumblings are more about how much I would miss the handiness of EU posting etc in the hobby,

Best Mark.
 
Posted by Thomas Smith (Member # 1889) on June 13, 2016, 06:02 AM:
 
Hello Mark
Don't think you should stay in the EU because its handy to
Ship parcels, you have to think of the future where I live
You now have to wait longer for GP appointments.

I've been told recently that I have a 3 month wait for
A hospital consultation where before I had appointment
Within two weeks, I can't move out of my current flat unless
I move to a different town because housing shortage in my area
 
Posted by James Wilson (Member # 4620) on June 13, 2016, 06:25 AM:
 
I think we should LEAVE the EU no question. Plus I thought this Forum was non political, I think the administrator should keep an eye on things. I could write a lot on Trump, but I don`t think that's what our American cousins want to read.
 
Posted by Thomas Smith (Member # 1889) on June 13, 2016, 07:54 AM:
 
Hello James yes your correct non political I shouldn't have
Posted on this subject so yes let's say no more
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2