8mm Forum: Eumig Mark S 807D washer and retainer clip

This is topic Eumig Mark S 807D washer and retainer clip in forum 8mm Forum at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=011571

Posted by Bradford A Moore (Member # 426) on June 25, 2017, 04:53 PM:

Hey All,

I'm looking for a washer and retainer clip for the function cam that sits underneath the function switch of a Eumig Mark S 807D?

Posted by Steve Klare (Member # 12) on June 27, 2017, 03:39 PM:

Hey Brad,

Does the retainer clip you need look like this?

(-is it supposed to snap into a slot in the shaft?)

Posted by Bradford A Moore (Member # 426) on June 27, 2017, 05:21 PM:

Hi Steve,

I'm not sure. I'm going with what the guy told me who is working on it. He said I may even need the the light pin too, which controls the light switch. He took the clip, and washer from the bottom to see if that would help temporarily. It did for a few days, and then went out again. If you have the clip. washer, and pin that would be great. Or any of these, that would help. Watching the image with that lens for a few days, was great.

Posted by Steve Klare (Member # 12) on June 27, 2017, 07:08 PM:

I don't have these parts, but I'm trying to see if there is something generic you can grab at a hardware or auto parts store that will do the job.

Posted by Bradford A Moore (Member # 426) on June 27, 2017, 08:07 PM:

Thanks!

Posted by Steve Klare (Member # 12) on June 27, 2017, 10:17 PM:

We do what we can!

UBB.classic^TM 6.3.1.2