8mm Forum: Is there a tool that can punch sprocket holes for 8mm, Super 8 and 16mm?

This is topic Is there a tool that can punch sprocket holes for 8mm, Super 8 and 16mm? in forum 8mm Forum at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=011732

Posted by Robert Lee (Member # 5776) on September 12, 2017, 02:28 PM:

So I can use regular scotch tape when splicing. It will save money on Kodak presstapes or save time waiting for film cement to dry.

Where can I buy leader trimer for 8mm and 16mm?

Posted by Maurice Leakey (Member # 916) on September 12, 2017, 02:48 PM:

Robert
1) Do not use regular Scotch tape which is unsuitable for film joining. Only use the correct specified tape.
2) The range of CIR joiners in their three gauges will all perforate the tape as they join.
3) Not sure what you mean by "leader trimmer".

Posted by Robert Lee (Member # 5776) on September 12, 2017, 03:04 PM:

It's a film trimmer that usually comes with a projector. You use it to trim the leader so the machine can feed it in better.

Where can I buy a CIR/Ciro/Guillotine splicer for 8mm and super 8? Only ebay? It seems most guillotine splicers on ebay are for super 8, hard to find for regular 8.

This one looks nice. https://www.youtube.com/watch?v=_wVlRAI33EE Found it on ebay for $160, I'll wait for a better deal.

[ September 12, 2017, 04:52 PM: Message edited by: Robert Lee ]

Posted by Will Trenfield (Member # 5321) on September 12, 2017, 04:39 PM:

I remember the warnings not to use regular Scotch tape to splice magnetic tape many years ago. The problem was that the adhesive would spread from beneath the tape and could clog up the magnetic heads.

Posted by Andrew Woodcock (Member # 3260) on September 12, 2017, 04:49 PM:

It's too thick, too strong and completely the wrong stuff.

Just buy Jackro 8mm / 16mm splice tape as can be bought by the roll and a Super 8mm / 16mm C.I.R. splicer.
Problem solved.

Simples [Wink]

Posted by Janice Glesser (Member # 2758) on September 12, 2017, 06:30 PM:

Robert...I bought my Std. 8mm Ciro splicer from Ewan Colsell in the UK.He sells both Super 8 and Std 8 reconditioned Ciro splicers. He does not sell 16mm splicers.

http://cirsplicers.ewancolsell.com

Posted by Andrew Woodcock (Member # 3260) on September 12, 2017, 06:48 PM:

There are plenty that still do Janice, Globally for these two popular gauges.

Why do people always look to the alternative before seeking the correct, most obvious and correct path en route to their issues? [Confused]

Posted by Robert Lee (Member # 5776) on September 12, 2017, 07:42 PM:

Janice, thanks for the link.

Posted by Maurice Leakey (Member # 916) on September 13, 2017, 03:05 AM:

Robert
Regarding film trimmers.
Various projectors each seem to have their own idea of a cut for lacing. Most Super 8 and standard 8 projectors come with a loose trimmer (it often seems to walk!). Many instruction books often show a drawing of the cut which they recommend, this you can follow with a pair of scissors.
Most 16mm projectors have a built-in trimmer.

Posted by Robert Lee (Member # 5776) on September 13, 2017, 04:17 PM:

Maurice,
Thanks for the tip. It's easier if I can buy them but looks like ebay is my only choice so I will keep a lookout for it.

Posted by Andrew Woodcock (Member # 3260) on September 13, 2017, 05:17 PM:

All of the correct and appropriate kit is out there Robert.
It is just a question of whether or not you are comfortable in paying out for what it takes you to gain what you seek from a professional and acceptable film joint.

Some are, all too many are not, such is this hobby! [Wink]

I think I may have kinda answered my own earlier question here as always. [Big Grin]

UBB.classic^TM 6.3.1.2