This is topic Keystone 109D Malfunction in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=011911
Posted by Laddie M. Crisp Jr. (Member # 6184) on November 27, 2017, 06:13 PM:
 
I am now the recipient of many reels of 8mm footage shot by my dad and grand father. I was told the Keystone 109D projector worked fine. Recently cranked it up and it seemed to work fine until I switched the "master switch" from "Fan" to "Lamp". Every time I do this the lamp illuminates as it should, but the fan stops. Any idea? [Confused]
 
Posted by Jim Schrader (Member # 9) on November 27, 2017, 06:39 PM:
 
Laddie I have a manual I can forward you maybe it explains why this takes place I have never owned one of these it came in a box of films I bought.
 
Posted by Laddie M. Crisp Jr. (Member # 6184) on November 28, 2017, 10:43 PM:
 
I found the the original manual but offered no clues.
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2