8mm Forum: Demand for ECN-2 Processing?

This is topic Demand for ECN-2 Processing? in forum 8mm Forum at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=011949

Posted by Jake Mayes (Member # 3292) on December 12, 2017, 05:23 PM:

I develop all my own films at home such as E6, still negatives, RA4 and prints (UK) and am starting to process ECN-2 with good success. (If only i could print them myself [Frown]

)

Is there likely to be any demand for ECN-2 processing from folks here at £12.00 a roll to process?

As i can have two films in the tank at any one time, i would gladly use spare chemicals to process the film of others, as i have to mix up a certain batch and would likely not use them to their end before i need to mix a new batch as i like to develop all films shortly after mixing for consistent results.

I am not offering the service yet, but i aim to on my etsy shop at some point which I am setting up. I am curious as to interest. I have developed my own E6 and C41 and B&W for an age, only makes sense to do my own ECN-2.

I am looking to gauge interest before offering such as a service in the UK as an alternative to a few others.

UBB.classic^TM 6.3.1.2