This is topic Attn Graham Ritchie or Paul Adsett in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=012188
Posted by Chip Gelmini (Member # 44) on March 27, 2018, 06:48 PM:
 
Inside later versions of the GS-1200 projector near the rewind motor there is a small card with 3 adjustments pots. The top adjustment will give the take up reel more or less RPM.

My question is what do the other 2 pots do?

Thanks in advance.
 
Posted by Graham Ritchie (Member # 559) on March 27, 2018, 09:30 PM:
 
Hi Chip

I had a quick look at the manual but so far have not found any reference to them. The information is there somewhere [Roll Eyes] will have another look later on.
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2