This is topic Audio Question in forum 8mm Forum at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=012255
Posted by Brad Kimball (Member # 5) on April 24, 2018, 11:53 AM:
So, can someone snap a picture of what kind of plug I need to insert into the speaker jack on the outside of my Chinon 7000 and what kind of adaoter do you use to connect it to your receiver?
Posted by Janice Glesser (Member # 2758) on April 24, 2018, 12:29 PM:
Hi Brad...According to the Super8 Database:
quote:
Ext Sp: RCA plug (for Canada and Usa) and 2-pin DIN jack (for other countries)
Could you post a pic of the back of your 7000 so we can see the outputs?
Posted by Chip Gelmini (Member # 44) on April 24, 2018, 02:28 PM:
https://www.google.com/search?q=Chinon+7000&client=firefox-b-1&source=lnms&tbm=isch&sa=X&ved=0ahUKEwjSisrG0dPaAhWsl-AKHTSQCEYQ_AUICygC&biw=1600&bih=776#imgrc=-gScZQJYzSOoGM:
Posted by Steve Klare (Member # 12) on April 24, 2018, 02:49 PM:
The Van Eck site says this has line-out.
If so, this should do it:
An Easy Hookup from a Projector to a Stereo Amplifier
To me it looks like a 1/8" (3.5mm) jack back towards the stern next to the volume knob!
Posted by Brad Kimball (Member # 5) on April 24, 2018, 04:33 PM:
I always have difficulty uploading pictures onto this site for some reason, but my unit has a single rca output jack labeled “Ext. Spkr 4-8 ohm”.
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2