This is topic Sprockets adpaters for projectors in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=012337

Posted by Luigi Castellitto (Member # 3759) on June 11, 2018, 09:27 AM:
 
Can anyone tell me for which projectors are these two pairs of sprockets adapters? I found them in an old box.
They would look like Super 8, of type that apply to Eumig dual or Bolex dual or something else.
I know they are often search and I would like to sell them.
Thank you. [Smile]

 -

 -
 
Posted by Jose Artiles (Member # 471) on June 11, 2018, 09:41 AM:
 
Photos are sprockets for eumig Mark S 802 series.
 
Posted by Luigi Castellitto (Member # 3759) on June 11, 2018, 09:45 AM:
 
Thank you, Jose, but in the second picture are the same pairs, only turned over (EDIT: Ok, you corrected the comment, I thank you.).

Are both Super 8 pairs, come from the same projector?
They have that slightly different circular border, visible in the first picture.
The white ones seem to come from the Eumig Mark S 802 series as you say (maybe even the S 810 D, looking at the photos on web). But the black ones?
I put a sales announcement, for those who recognize and want them. [Smile]
 
Posted by Maurice Leakey (Member # 916) on June 11, 2018, 10:45 AM:
 
I would say that the black ones are standard 8, and the grey ones are Super 8.
Their teeth spacing and size of teeth are different.
 
Posted by Brian Fretwell (Member # 4302) on June 11, 2018, 03:22 PM:
 
That seems right the ones on my 810D are black for standard 8 and I'm pretty sure they are the same as on the 710D as well.
 
Posted by Luigi Castellitto (Member # 3759) on June 11, 2018, 05:43 PM:
 
You might be right, but the picture tricks a bit '(I have no better machines to do it), close up seem of the same size.
And by matching with a film, both pairs seem to fit well with Super 8. I just have to do more precise measurements.

Meanwhile, I also found a pressure plate and film guide for Super 8 maybe they come from the same place as sprockets: http://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=3;t=003330# 000002
 
Posted by John Last (Member # 3414) on June 19, 2018, 01:53 PM:
 
I am desperate to find a rear Standard 8 sprocket for my 710 and I wonder if you can help me?
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2