This is topic Eumig Mark S query in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=012353

---

Posted by Colin Parkinson (Member # 6486) on June 15, 2018, 03:12 PM:
 
Hi guys i am new to this! I have picked up a Eumig Mark S which needs new motor bearings which I have ordered from Van Eck.

Has anyone got instructions on how to remove the motor so I can change them?

Many thanks

Colin
 

---

Posted by Maurizio Di Cintio (Member # 144) on June 15, 2018, 05:39 PM:
 
Van Eck should be able to provide you with all necessary info...
 

---

Posted by John Last (Member # 3414) on June 19, 2018, 01:47 PM:
 
If you buy the workshop manual for this projector from Old Timer full details are given on how to set up the motor and all other parts too.
 

---

Posted by Colin Parkinson (Member # 6486) on June 19, 2018, 03:16 PM:
 
Thanks John, how do I find Old Timer?

Colin
 

---

Posted by Colin Parkinson (Member # 6486) on June 23, 2018, 12:04 PM:
 
I have removed the amplifier and transformer, and managed to change the bearings.

Not that difficult, just a bit of a fiddle......

Colin
 

---

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC


UBB.classic^TM 6.3.1.2