8mm Forum: changing a projector bulb on Eumig 822 Sonomatic

This is topic changing a projector bulb on Eumig 822 Sonomatic in forum 8mm Forum at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=012481

Posted by Tim Murray (Member # 4555) on September 03, 2018, 12:25 PM:

Hi I have been using a Eumig S812D projector but now have a 822 Sonomatic. I need to change the bulb but cannot see how to do it. On the S812D it was fairly straightforward but on the 822 there is a metal plate which makes it almost impossible to fit the bulb into its metal cup at the front of the bulb and squeeze it in between that and the metal plate behind it. Does anyone have experience of changing the bulbs and is there a simple way. Do I need to remove the plate before I can fit it? Any help would be appreciated. Tim

UBB.classic^TM 6.3.1.2