This is topic Bell & Howell Multi-Motion Projector issue in forum 8mm Forum at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=012663
Posted by Norman Hixenbaugh (Member # 1566) on December 19, 2018, 04:30 AM:
I have a Bell & Howell 1639C Multi-Motion Dual 8 projector. When I load the film in the forward position, the image is very slow, choppy and stuttery at all speeds. After it has wound onto the take-up take-up reel for a time, I tried the projector in reverse, and in reverse mode, the projector presents a nice steady image.
What could be going on here?
Posted by Jim Schrader (Member # 9) on December 20, 2018, 01:57 PM:
do you have the proper setting set for the format of film your using 8mm for 8mm and super 8 for super 8? could be that the film did not load properly your loops are not right? make sure you trim the end of the film before loading.
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2