This is topic EUMIG S 905 brocken in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=012728
Posted by Jennifer Pardo (Member # 6814) on January 21, 2019, 06:28 AM:
 
Hi there, I´ve got an Eumig s905 and the flywheel doesn´t work, and I´m not sure if it´s because of the Worm gear. Does someone know if this makes sense? or could be anything else? Thanks!!
 
Posted by Paul Adsett (Member # 25) on January 21, 2019, 09:32 AM:
 
Jennifer, can you be more specific in describing your problem. The flywheel will only spin up when the projector has film loaded and running. Although it should spin freely for a minute or so after you then stop the projection.
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2