8mm Forum: Eumig Mark S 710D motor

This is topic Eumig Mark S 710D motor in forum 8mm Forum at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=012899

Posted by Ian Smith (Member # 6943) on April 11, 2019, 08:36 AM:

I recently purchased a projector in dubious quality and have ended up with a dud. The thermal fuse had been bypassed and the transformer has burnt out. The have powered the lamp and sound boards separately from battery power and they both work. The motor seems OK but with the burnt out transformer I cannot test it. Does anyone know what the power requirements are for the motor so that I can power it directly. I have a single spool of film that I would like to watch but so far no projector to run it on.
Failing that does anyone have a repair manual that may show the wiring and voltages of the projector

Posted by John Capazzo (Member # 157) on April 18, 2019, 10:51 PM:

Ian, when I was in Durban, I came across a second hand shop that had a Eumig 807D. I didn't want it because I had two 810D. It worked. Maybe it's still there.

Posted by John Keleshian (Member # 6951) on April 20, 2019, 05:19 PM:

I have a lot of Eumig parts and doner machines also service info I can check on Monday, off hand I think the motor is line voltage

UBB.classic^TM 6.3.1.2