8mm Forum: Advice on epoxy for B&H 456 projector rubber drive roller

This is topic Advice on epoxy for B&H 456 projector rubber drive roller in forum 8mm Forum at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=012913

Posted by Norman Hixenbaugh (Member # 1566) on April 22, 2019, 12:14 PM:

I peeled the worn rubber upper drive roller off the upper metal pulley of my B&H 456A projector and noticed than it is affixed by some sort of epoxy.

I noticed this as the replacement stays on fine in forward motion, but starts to spin off the pulley when in reverse motion.

Any advice on a reliable epoxy I can use to bond the rubber drive roller to the metal pulley on my B&H 456A projector?

Posted by John Keleshian (Member # 6951) on April 22, 2019, 02:11 PM:

clean rubber and shaft and use contact cement that's what B&H used we were authorized service center for 45 years

Posted by Norman Hixenbaugh (Member # 1566) on April 22, 2019, 02:44 PM:

What kind/brand of contact cement would you recommend? I have Super Glue Fix-All Adhesive. Says it works on rubber, wood, and metal.

UBB.classic^TM 6.3.1.2