This is topic Elmo FP-C in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=013146
Posted by Todd Silk (Member # 7137) on October 18, 2019, 09:38 AM:
 
I'm looking for a wiring diagram for a Elmo FP-C projector or any suggestions on what to check. The little pilot light comes on behind the indicator that shows the film selected. However the main lamp or the motor does not turn on. Any ideas?

Todd
 
Posted by Todd Silk (Member # 7137) on October 22, 2019, 07:27 AM:
 
Found the problem. Lamp not turning on was because it has a lockout when it is in threading mode. The second problem was a broken wire on the speed control reostat.

Everything works now
 
Posted by Janice Glesser (Member # 2758) on October 22, 2019, 12:00 PM:
 
Way to go Todd. Enjoy your films!
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2