8mm Forum: motor for 200B

This is topic motor for 200B in forum 9.5mm for sale/trade/wanted at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=10;t=000019

Posted by Jeff Chaney (Member # 1025) on January 25, 2008, 10:47 AM:

Hello
I am looking for a replacement base/motor for my 200B. The lamp works but the projector never turns so I am guessing it is shot. Or if anyone has any tricks to look for I'd check those first. I have a bunch of other projectors that work fine but would love to know they all work if i need a back up.
Cheers
Dino

Posted by Paul Adsett (Member # 25) on January 25, 2008, 12:45 PM:

Welcome to the forum Jeff. We have quite a few nine-five enthusiasts here, and hopefully someone can help you out. I would first suggest you contact Tony Reypert at Buckingham films in the UK. Tony is an expert on Pathe equipment and has a cave full of Pathe spares - that's where I got a drive motor for my Pathe Baby.

Posted by Jeff Chaney (Member # 1025) on January 25, 2008, 01:10 PM:

Thanks paul actually my name is Dino, but i couldn't use my name for some reason, since i tried to register months ago using my name and I forgot to put first letters in capital so it seemed to block my name permanently so i registered under my friends name. I hope I don't get kicked off now, but my name is Dino Everett and i really love 9.5's. i have a couple of straight baby's, a gem, 200B, an ercsam, and my main one which is the Specto 500. I really want a lux or one that will work with notched titles.. Do you know if the Paillard Bolex PA does this well?
But I will check with Buckingham. i deal with CH Cinema for films alot, but should probably ask them as well.
Cheers and thanks
Dino

UBB.classic^TM 6.3.1.2