This is topic FS: Derann "Lady and the Tramp" Disney Feature **ON HOLD** in forum 8mm films for sale/trade/wanted at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=2;t=005319
Posted by Louis Franchetti (Member # 2035) on October 19, 2014, 04:18 PM:
 
For sale I'm offering a gorgeous, Derann print of, "Lady and the Tramp" (1955). It is an LPP, Scope print. Mounted on 2x800'ft rls. Complete with titles. I'm asking $350.00 shipped. Please PM me any questions you may have.

[ October 20, 2014, 09:08 AM: Message edited by: Louis Franchetti ]
 
Posted by Andrew Woodcock (Member # 3260) on October 20, 2014, 02:27 AM:
 
If this is the full feature Louis it should be on 4x600ft reels or 2 x 800ft spools minimum if re-spooled. Are you sure it is on 2x600ft reels Louis?
 
Posted by Louis Franchetti (Member # 2035) on October 20, 2014, 09:07 AM:
 
It is mounted on 2x800'ft rls. I typed in the wrong size before.
 
Posted by Paul Adsett (Member # 25) on October 20, 2014, 09:08 AM:
 
My Derann print, which is complete, is mounted on 2 x 800ft reels, so 1600ft total, or a running time of approximately 80 minutes.
 
Posted by Andrew Woodcock (Member # 3260) on October 20, 2014, 10:35 AM:
 
That's more like it. Thanks Louis and Paul. Is it brimming on 2x 800ft as I have some of my Disney prints like this but they tend to be right up to the very edge on 2x 800ft reels especially the ones issued as 4x600ft releases (though they were never full on 600ft reels)?

Still don't have this one yet but hope to find one next year with any luck [Smile]
 
Posted by Paul Adsett (Member # 25) on October 20, 2014, 10:42 PM:
 
Andrew, a comfortable fit on both 800 ft spools.
 
Posted by Andrew Woodcock (Member # 3260) on October 21, 2014, 05:17 AM:
 
Thanks for the info Paul [Razz]
 
Posted by Louis Franchetti (Member # 2035) on October 22, 2014, 01:46 PM:
 
PRICE REDUCED TO $300.00 Shipped.
 
Posted by Riccardo Fenoglio (Member # 4447) on October 27, 2014, 05:15 AM:
 
Hi is still available the Lady and the Tramp in super8?
 
Posted by Riccardo Fenoglio (Member # 4447) on October 27, 2014, 10:12 AM:
 
Hi is still available the Lady and the Tramp in super8?
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2