8mm Forum: P26 Eumig drive band wanted

This is topic P26 Eumig drive band wanted in forum 8mm films for sale/trade/wanted at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=2;t=007100

Posted by Alan Taylor (Member # 6307) on January 31, 2018, 03:00 PM:

If anyone has a metal belt drive band for a P26 Eumig and can sell it to me please let me know. Alternatively if you know where I can buy one or know of a substitute of the same size from another machine model- that would be helpful.
The size of the band is 16cm or 6.3inches from point of join to outer curve edge Photo attached-

Posted by Brian Fretwell (Member # 4302) on February 01, 2018, 03:19 AM:

Is it of the spring kind? I assume it is. If so a larger belt could be cut to size. I remember model stationary steam engines of the Mamod type used these and I bought one to replace a belt that had failed in a reel to reel tape recorder. Perhaps you could find one in a model shop.

UBB.classic^TM 6.3.1.2