8mm Forum: Eumig P8m Imperial projector

This is topic Eumig P8m Imperial projector in forum 8mm equipment for sale/trade at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=3;t=000159

Posted by Peter Farrell-Vinay (Member # 190) on April 08, 2005, 03:47 PM:

I'm looking for a power lead for this projector. The critical bit is where the lead enters the projector. The other end doesn't matter. Indeed if you jsut have the projector end plug that will do.

my email is farrellvinay@btinternet.com

Posted by Jan Bister (Member # 332) on April 08, 2005, 05:10 PM:

I'm assuming it's this one: http://members.xoom.virgilio.it/8millimetri/pagine/eumig%20p8m%20imperial%20proiett..htm

Can you perchance put up a picture of where the power plug goes? If it's a two-prong connector, maybe one of those AC cords for portable radios and cassette recorders will work. If not, what you could do is simply take the back cover off the projector and solder your own AC connector (or cord) to where the wires attach to the existing connector - or have a friend do it for you. Sorry I can't be of more help, but good luck! [Smile]

Posted by Rob Koeling (Member # 35) on April 20, 2005, 07:17 AM:

Hi Peter,

I think I have a lead for you. I had the same problem last year. Then a fellow collector from France helped me out. I think I have located my own original lead in the mean time. I'll check tonight and let you know.
If not succesful, check this website:
web page
They listed a lead recently.

Best,

- Rob

UBB.classic^TM 6.3.1.2