This is topic WANTED: Bobbin for CIR Splicer in forum 8mm equipment for sale/trade at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=3;t=001034
Posted by Bart Smith (Member # 780) on April 08, 2010, 06:10 AM:
 
Hi,

If anyone has a spare brown plastic bobbin (the round brown plastic part which holds the tape) for a CIR Super or Standard 8 splicer I'm after buying it, and will pay by PayPal.

Thanks,

Bart
 
Posted by David Kilderry (Member # 549) on April 08, 2010, 11:43 AM:
 
This is a common missing part on these!
 
Posted by Oscar Iniesta (Member # 1731) on April 08, 2010, 02:01 PM:
 
Hello. Have you tried looking in the CIR web page? I remember to have seen a lot of spares for their machines there.
 
Posted by Bart Smith (Member # 780) on April 08, 2010, 03:05 PM:
 
I can buy one new here in the UK, but it is a LOT of money for a couple of bits of plastic.
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2