8mm Forum: WANTED:

This is topic WANTED: in forum 8mm equipment for sale/trade at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=3;t=001072

Posted by Jorge Rondao (Member # 1434) on July 12, 2010, 05:10 PM:

WANTED,the two rolls of Euming 807D fixing in the pin like the figure, if someone has for sale or do not need!!

Posted by Tony Pitts (Member # 1679) on November 01, 2010, 01:53 PM:

HI did you get this part?

Posted by Pasquale DAlessio (Member # 2052) on November 02, 2010, 11:44 AM:

If you can't find the part, can't you just cut a piece of rubber or plastic tubing to replace it? Maybe even aquarium tubing? Then slip it over the shaft? Just an idea.

[ November 03, 2010, 01:42 PM: Message edited by: Pasquale DAlessio ]

Posted by Jorge Rondao (Member # 1434) on November 03, 2010, 07:50 PM:

As I could not, I had to make some, but as a tube could not be right because it has to be bent towards on the center of the film to does not touch anything, I had to make with two ends of two crochet hooks since are aluminum very soft and polished swapped tips to keep the lower and middle of the film spend playing only on the margins.

UBB.classic^TM 6.3.1.2