This is topic WANTED: CIRO 8MM GUILLOTINE TAPE SPLICER in forum 8mm equipment for sale/trade at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=3;t=001185
Posted by Rob Buttrum (Member # 1182) on January 21, 2011, 10:45 PM:
LOOKING TO BUY A REG. 8MM CIRO GUILLOTINE TAPE SPLICER. OR ANY LEADS OF ANY FOR SALE ON-LINE OR OTHER WISE!
THANK YOU!
Posted by Jim Schrader (Member # 9) on January 22, 2011, 02:38 PM:
[ April 12, 2011, 09:45 AM: Message edited by: Jim Schrader ]
Posted by Rob Buttrum (Member # 1182) on February 09, 2011, 03:44 PM:
anyone?
Posted by Joe Taffis (Member # 4) on February 09, 2011, 05:47 PM:
Rob, all the CIRO/Guillotine tape splicers I've seen are for super 8 only.
Posted by Lars-Goran Ahlm (Member # 1908) on February 09, 2011, 06:22 PM:
They do exist, look here (a bit down on the side) as you see they even have one for 9.5
www.wittner-kinotechnik.de/katalog/02_filmb/index.php
Posted by Rob Buttrum (Member # 1182) on April 11, 2011, 11:22 PM:
anyone got any leads?
Posted by Joerg Polzfusz (Member # 602) on April 12, 2011, 03:39 AM:
Hi,
Ewan Colsell (e w a n u n o -ÄT- g m a i l -DÖT- com) once sold me a Reg8-CIR instead of a Super8-CIR by mistake. He might still have the Reg8-CIR ...
Jörg
Posted by Rob Buttrum (Member # 1182) on April 14, 2011, 01:44 PM:
THANKS JORG! ILL CONTACT HIM ASAP!
Posted by Jorge Rondao (Member # 1434) on April 14, 2011, 06:07 PM:
See here very sheep
http://www.ewancolsell.com/super
Regards
Posted by Jorge Rondao (Member # 1434) on April 30, 2011, 09:41 AM:
Well???
Posted by Rob Buttrum (Member # 1182) on April 30, 2011, 04:49 PM:
Ewan hooked me up with one. should be arriving in the mail any day now.
Thanks!!!
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2