This is topic plastic block for tape 8mm in forum 8mm equipment for sale/trade at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=3;t=001964
Posted by Silvano Viani (Member # 3544) on February 14, 2013, 11:30 AM:
hi, i'am new member, sorry if i could not present me better then this, i made some of these plastic pcs to lock the tape firmly on the spool, if you need i can ship worldwide, regards it's for 8mm size.
to see the image click here :
https://picasaweb.google.com/117447679455901487617/Gennaio2012#5842736921204435794
Posted by Pasquale DAlessio (Member # 2052) on February 14, 2013, 12:01 PM:
Silvano
WELCOME TO THE FORUM!!
How much for these clips?
PatD
Posted by Vidar Olavesen (Member # 3354) on February 14, 2013, 01:16 PM:
I too want these rather than the taped ones I usually get :-) Hate the tapes, always make a mess so I need to cut the leader every time.
This doesn't do any damage to film, does it?
Posted by Winbert Hutahaean (Member # 58) on February 14, 2013, 02:57 PM:
Vidar, this will not make any damage to film.
But the problem with a cheap plastic or non-precision clip that they tend to get loose resulting it will not hold the leader at all.
Posted by Silvano Viani (Member # 3544) on February 15, 2013, 02:42 AM:
I send answer directly to each one.
I'd like to add that this pcs are made in resin, the pcs are quite elastic and fit perfectly into spool for 8mm tape. I have try it many times, i have just sale it here in italy too, and it work correctly, the pcs fit in the spool by side so i think there is no way to damage tape, as you see in the picture there is one pushed into the spool. Hope this could help. Many regards, thank you !
Posted by Hugh Thompson Scott (Member # 2922) on February 15, 2013, 04:03 AM:
Hi Silvano,I must say your clips look to be a far superior job to
those little shallow ones that were available,and if the spool were full, even a little strip of paper tape across the spool and over the clip would be great at keeping the film in place with no sticky residue.Excellent.
Posted by Silvano Viani (Member # 3544) on March 06, 2013, 12:08 PM:
Thanks Hugh, sorry for delay, i'm working this few week to make the new model for 16mm film, hope you will like to buy just few pcs to try it, regards. silvano
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2