8mm Forum: Need knob part for any ST 1200 series

This is topic Need knob part for any ST 1200 series in forum 8mm equipment for sale/trade at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=3;t=002080

Posted by John Capazzo (Member # 157) on May 11, 2013, 02:34 PM:

I need the lamp brightness knob for any of the ST 1200 series. A simple cosmetic piece that slips on and off. Shaped like a tube.

thanks,
John

Posted by Oscar Iniesta (Member # 1731) on May 12, 2013, 09:40 AM:

Jajajaja!!!!!!!!!
I posted the same some time ago! I had that problem with a perfect condition Elmo ST1200HD with the lamp selector knob lost. And then, another forum member (Joe Taffis, if I am not wrong) send it to me.
John, I have a rare Elmo SC-8T projector which is made from St1200 parts. I don´t have it here now, but I remember it has some of the St1200 knobs. If you desired part is on it, I will send it to you. That way I will continue this crazy chain of favours, with the same spare part travelling from the USA to Europe and back again! Jajajaj! [Smile]

Posted by John Capazzo (Member # 157) on May 12, 2013, 10:05 AM:

Oscar, thanks. If that machine's knob is the same for ST 1200, I'll take it.

John

Posted by Oscar Iniesta (Member # 1731) on May 13, 2013, 03:58 PM:

This is your lucky day! I have the knob in perfect condition for you. Send your address to my e-mail and I will send it to you.

arri16bleq@yahoo.es

Posted by John Capazzo (Member # 157) on May 14, 2013, 01:39 PM:

Thanks so much, Oscar! I shall email you.

Posted by Oscar Iniesta (Member # 1731) on May 20, 2013, 01:09 PM:

The knob is now travelling to the USA. Lucky knob!

Posted by Oscar Iniesta (Member # 1731) on May 30, 2013, 04:14 AM:

Did you receive the knob? Is it ok?

UBB.classic^TM 6.3.1.2