This is topic Cresta VS2000 info request in forum 8mm equipment for sale/trade at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=3;t=002205

---

Posted by Derek Dorking (Member # 3916) on September 06, 2013, 03:32 PM:
 
Hi, I am a new member just found this site by wandering the internet- great site! Lots of interesting info. I am looking for any information on the control wiring for attaching the VS2000 control socket to a Tascam or simular which were used. I used to use a home build syncroniser build from practical electronics in the eighties which I used the potental divider princable controlling the motor speed on a Philips N2214 cassette. This worked fine on video and pulse sync but I wanted to get the Cresta working as it was an Ebay find about four years ago.
 

---

Posted by Pasquale DAlessio (Member # 2052) on September 06, 2013, 07:26 PM:
 
Derek

WELCOME TO THE FORUM!!!!!

PatD
 

---

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC


UBB.classic^TM 6.3.1.2