This is topic Plastic roller for Elmo 16-CL in forum 8mm equipment for sale/trade at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=3;t=002245
Posted by Vidar Olavesen (Member # 3354) on October 14, 2013, 02:58 AM:
Anyone know of a place to get these rollers?
![-](http://8mmforum.film-tech.com/cgi-bin/showpic.cgi?dir=uploads0503&file=Elmopartc.jpg)
I assume it's not one of the rubber rollers, as it's hard plastic on my machine
Posted by Maurice Leakey (Member # 916) on October 14, 2013, 04:02 AM:
Have you tried Richard C Patchett? He carries many spares.
Posted by Vidar Olavesen (Member # 3354) on October 14, 2013, 05:39 AM:
Email bounced when I tried :-( Can't deliver
Posted by Maurice Leakey (Member # 916) on October 14, 2013, 11:11 AM:
I was in correspondence with him recently when I bought an Eiki part. Did you try:-
patchetts at ameritech.net
Use the usual in place of "at".
Posted by Vidar Olavesen (Member # 3354) on October 14, 2013, 11:24 AM:
Yes, that's the email I sent to. Got error message back
Posted by Vidar Olavesen (Member # 3354) on October 14, 2013, 11:58 AM:
Yes, that's the email I sent to. Got error message back
Posted by Richard C Patchett (Member # 974) on October 14, 2013, 01:14 PM:
Greetings Vidar
You must be on another system.
Have you tried using my web site?
Looks like a Guide roller 1 P 412200 @$45.10
To be sure can you give me a part number or a picture of said roller both ends and side view by its self?
THe other plastic rollers have a nipple on one end one is smaller and the other is larger then theP 412200
RC
Posted by Vidar Olavesen (Member # 3354) on October 14, 2013, 01:40 PM:
That sounded expensive. I suppose you mean the whole mechanism?
![-](http://8mmforum.film-tech.com/cgi-bin/showpic.cgi?dir=uploads0503&file=ElmoPlasticRoller.jpg)
Just the plastic piece there ... Looks like a 5-10 dollar piece, but of course I might be mistaken
Posted by Richard C Patchett (Member # 974) on October 14, 2013, 02:00 PM:
Greetings
Does this fit into a cover?
That roller is the more costly one then the other plastic ones
When i got theses from Elmo i also questioned the cost.
One end is flat with a hole for the screw the other end has a hole too but also has a indent circle around it
RC
Posted by Vidar Olavesen (Member # 3354) on October 14, 2013, 02:05 PM:
Yes, the cover is on in the first picture. Hmmm ... 45 for that small plastic roller ... I'll think about it then. Sometimes it's cheaper to buy a replacement projector (I think I paid around 150 to 200 for the Elmo)
Thanks though
Posted by Richard C Patchett (Member # 974) on October 14, 2013, 02:26 PM:
Greetings
Well it least I have 8 of them in stock, Sorry about the cost.
I was shocked about my cost on theses too.
Thank you for contacting me
And thank you Maurice for the referral
Note whats left on my web site under Elmo is it
When gone, there gone
Elmo is no longer selling parts Even as a dealer
Thank you all once again
RC
Posted by Vidar Olavesen (Member # 3354) on October 14, 2013, 02:33 PM:
What about the rubber rollers? (4 of them, ain't it?) What do they cost from you?
Posted by Richard C Patchett (Member # 974) on October 14, 2013, 02:45 PM:
Greetings
The cost
Complete set of 4 Elmo Rollers
16mm 16-CL optical & 16-AL
$105.50
Or if you have mag
Complete set of 5 Elmo Rollers
16 CL Magnetic
TRV-6, TRV-16G, TRV-16H
$129.50
Plus Mailing of $25.00 priorty mail
Or i can send 1st class post for $15.00
RC
Posted by Vidar Olavesen (Member # 3354) on October 14, 2013, 02:48 PM:
I have one that does both Optical and Magnetic, so I need the most expensive package then ... I will think about this a while, first see how much money is left after visiting Ealing and BFCC's convention.
Are these rollers new or refurbished?
Thank you for all the info, will get back to you later
Posted by Richard C Patchett (Member # 974) on October 14, 2013, 03:36 PM:
Greetings
If you can go to my web site click on Elmo
You will see pictures of said rollers
NEW
RC
Posted by Vidar Olavesen (Member # 3354) on October 28, 2013, 08:35 AM:
Then I got it fixed for 35 including shipping ... I still might come back to the 5 roller set, Richard. Thank you
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2