8mm Forum: Sankyo 600 part wanted. spacer for Micro Switch

This is topic Sankyo 600 part wanted. spacer for Micro Switch in forum 8mm equipment for sale/trade at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=3;t=002503

Posted by Phil Mitchell (Member # 3876) on October 15, 2014, 03:20 AM:

Hi all, I know this would be very lucky to find, but one doesn't know til one asks.

During recent repair of my Sankyo 600, a mate of mine who was helping has appeared to misplace as far as we can tell, an important part.

It is a bit of plastic same colour as inside of projector, it sits in a hole, well the top of it does and is put between Micro switch Plunger blade already there and inside reverse Micro switch. It stops selector knob when in stop position pressing in either forward or reverse MS plungers and assists in pressing plunger in on when selector is put into reverse.

Pictures below explain it better than I maybe can, I'm not even sure if spacer is right term for it.

If anyone has the part or a suggestion of a work around, I am all ears. Or in this case on a forum, all eyes.

Thanks Phil

UBB.classic^TM 6.3.1.2