This is topic Sankyo 702 in forum 8mm equipment for sale/trade at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=3;t=002572

---

Posted by Lee Panton (Member # 4443) on February 04, 2015, 05:18 AM:
 
Anyone know how to convert the rear arm on Sankyo 702 to accept 800 ft reels…they say its possible.
 

---

Posted by Mark Mander (Member # 340) on February 04, 2015, 09:57 AM:
 
Hi Lee,
It can be done quite easily,if you can find the end shute on the film path from a 800 machine it will fit straight on,i think it's one screw to undo and swap over,Mark.
 

---

Posted by Lee Panton (Member # 4443) on February 04, 2015, 10:42 AM:
 
Thanks Mark, Finding that part would be quite slim i guess.
 

---

Posted by Mark Mander (Member # 340) on February 04, 2015, 02:53 PM:
 
Hi Lee,You could modify the original one,the arms on the machine are the same size as the 800 so it's just the film path end shute that stops the 800ft spools from going on,Mark.
 

---

Posted by Jon Addams (Member # 816) on February 04, 2015, 07:53 PM:
 
In the motor strong enough to handle the 800' full reel?

Thanks

Jon
 

---

Posted by Ferran Gimenez (Member # 1069) on February 05, 2015, 12:29 AM:
 
Jon: yes it is, there's no problem.
 

---

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC


UBB.classic^TM 6.3.1.2