8mm Forum: WANTED: Eumig 926 switch mechanism/relay

This is topic WANTED: Eumig 926 switch mechanism/relay in forum 8mm equipment for sale/trade at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=3;t=002676

Posted by John Capazzo (Member # 157) on July 01, 2015, 05:50 PM:

Does anyone have the switch mechanism/relay for a Eumig 926 stereo? Same switch will work from the 940. It has four wires attached from the back of the machine. Thanks--John

Posted by Thijs de Kort (Member # 4897) on July 02, 2015, 01:55 AM:

Hey John,
Are you able of snapping a picture of the part you mean that way i can look out for one.
Thijs

Posted by Andrew Woodcock (Member # 3260) on July 02, 2015, 02:57 PM:

John, have a gander at Paul Adsett's old post regarding these sometimes troublesome switches.

He completely changed his on his S938 and fitted a different higher quality type and was very pleased with the results.

It didn't look difficult for him to do and may well result in a far more reliable main switch for the years ahead.

Posted by Maurizio Di Cintio (Member # 144) on July 11, 2015, 08:24 AM:

Hi, John. If it's just the mains switch you're talking about, I got it: but it should be the same for all the 900 series models, shouldn't it? Why did you write "relay"? I am not very sure we are talking about the same part. But if it's what I wrote, I defintely have one to part with!!!

UBB.classic^TM 6.3.1.2