8mm Forum: WTB: ELMO GS1200 BACK COVER

This is topic WTB: ELMO GS1200 BACK COVER in forum 8mm equipment for sale/trade at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=3;t=002880

Posted by Mark L Barton (Member # 1512) on May 22, 2016, 04:15 PM:

Hello all. Im after the back cover (you know the bit, where the speakers are etc) as one of my GSs has had a hit causing a crack. Is there any kind soul out there you has spares etc, or have a machine that they are breaking for spares...help please. Thanks

Posted by Mark Todd (Member # 96) on May 25, 2016, 04:44 AM:

Hi Mark thats a real shame, what happend to the GS.

A mini tragedy as these beasties are lovely.

Best Mark.

PS sorry no bits here.

Posted by George Seaton (Member # 5402) on May 25, 2016, 10:49 AM:

Hello Mark, you must be gutted; I know I would be if anything happened to my GS1200.

I'm afraid I can't help you with a replacement cover but if you don't have a luck finding one would a 3D printing service be able to create one for you using your damaged one as a template?

Posted by Mark L Barton (Member # 1512) on May 26, 2016, 05:09 AM:

Thanks Guys I bought it with the slight damage, otherwise it works just fine, but as its an Elmo I would like it to be 'mint' condition. cheers

Posted by Steven J Kirk (Member # 1135) on May 26, 2016, 05:40 AM:

Ugo Grassi has a lot of Elmo spares. Is a member here.

http://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=3;t=002764#000016

Posted by Joe Taffis (Member # 4) on May 27, 2016, 11:59 AM:

Leon Norris has a few GS1200 back covers...

[ May 27, 2016, 01:32 PM: Message edited by: Joe Taffis ]

UBB.classic^TM 6.3.1.2