8mm Forum: Elmo Sound ST-1200 power chord wanted

This is topic Elmo Sound ST-1200 power chord wanted in forum 8mm equipment for sale/trade at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=3;t=002929

Posted by Trille Esther Frost (Member # 5480) on July 17, 2016, 01:19 AM:

Searching for an original power chord for an Elmo Sound ST-1200 projector... Let me know if you happen to have one for sale!

Posted by Winbert Hutahaean (Member # 58) on July 17, 2016, 08:19 AM:

There are several type of Elmo power connector. The most common ones is the one you can find on most desktop computers. But I have once seen a different ones which is rare. Which one is yours? Pls take a picture of the one in the projector's body so we can justify which one is needed😊

Posted by Maurice Leakey (Member # 916) on July 17, 2016, 10:34 AM:

I have a few ST 1200 models and they use the same power connection as shown.
http://www.leadsdirect.co.uk/shop/iec-c13-to-stripped-ends-white-mains-lead-2m/
However, one early model of mine uses a round 2-pin connector with side locating earth strips.

Posted by Niels Peter Buch (Member # 3757) on July 19, 2016, 03:54 PM:

Hello Trille.
Ive have an ekstra cord for your Elmo 1200.
Send me an PM for further information.
Kind regards

Posted by Barry Fritz (Member # 1865) on July 19, 2016, 06:45 PM:

The cord in the link Maurice posted is for a desktop PC. They are plentiful in Thrift Stores here in the U.S. for a couple of dollars?

Posted by Steve Klare (Member # 12) on July 19, 2016, 08:40 PM:

They are common as dirt, but not all ST-1200s use them.

(I think: just the HD)

Posted by Andrew Woodcock (Member # 3260) on July 20, 2016, 10:29 AM:

Over here, it appears only the very old original mag/opt green models that have the old style plug and socket. Everything else I have ever had here in the UK all has the I.E.C. style mains leads & sockets.

UBB.classic^TM 6.3.1.2