This is topic Pressure plate and film guide Super 8 in forum 8mm equipment for sale/trade at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=3;t=003330
Posted by Luigi Castellitto (Member # 3759) on June 11, 2018, 05:32 PM:
Press plate and film guide for Eumig projector (I don't know which model) Are Super 8, as reported by the "S" printed on the side.
20 euro + shipment cost
No refund.
Thank you.
Posted by Robert Crewdson (Member # 3790) on June 11, 2018, 05:33 PM:
Again , looks like the 810D.
Posted by Luigi Castellitto (Member # 3759) on June 11, 2018, 05:41 PM:
Yes, Robert, probable at 99%. Myself, I owned a Mark S 810 D.
Thank you for the tip.
It seems to me that they adapt to other Eumig, but I can not say that.
Posted by Brian Fretwell (Member # 4302) on June 12, 2018, 02:45 AM:
I don't think they changed them from the 710D, they look the same in the photos
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2