8mm Forum: EUMIG Mark S O and M super 8 projector wanted

This is topic EUMIG Mark S O and M super 8 projector wanted in forum 8mm equipment for sale/trade at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=3;t=003567

Posted by Osi Osgood (Member # 424) on November 04, 2019, 11:48 AM:

I'd like to find one of these sometime soon!

I thank whoever, ahead of time.

OSI

Posted by Robert Saraceno (Member # 4422) on November 04, 2019, 06:41 PM:

There's one for sale on Ebay Germany, it says shipping only in Germany - but I bought a projector from Germany back in July and asked the seller if he would consider shipping to the US - he agreed to.

https://www.ebay.de/itm/Super-8-Tonfilmprojektor-EUMIG-Mark-S-O-M-Gereinigt-geolt-getestet/323968311779?hash=item4b6e0421e3:g:MagAAOSwF9tdvsPa

Posted by Osi Osgood (Member # 424) on November 05, 2019, 11:19 AM:

Thank you for that link.

(gosh, I wonder as to how much it would cost just to mail it to the U.S.?)

Posted by Robert Saraceno (Member # 4422) on November 05, 2019, 02:45 PM:

I got an Elmo Sc-18 shipped for 70 euros - however German customs held it up for almost a month, but it was worth it. The guy I bought it from assumed that Americans wouldn't pay 70 euros for shipping, he was more than happy to do it.

Posted by Winbert Hutahaean (Member # 58) on November 07, 2019, 08:52 AM:

How do you deal with frequency (50hz vs. 60hz)? I don't see a speed adjustment on this Eumig. In some Elmos we need to change the pulley but I am not sure with this.

Posted by Paul Adsett (Member # 25) on November 07, 2019, 10:55 AM:

There is a 50/60 Hz 'flag' inside the projector. It's basically a mechanical device which re-positions the radial range of the mechanical drive ball on the rubber disc.

UBB.classic^TM 6.3.1.2