This is topic TQIII mod possible?? in forum 16mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=5;t=000521
Posted by Barry Johnson (Member # 84) on January 07, 2010, 07:11 AM:
 
Would like to make this machine into a manual threading model.It looks possible,but is it?
 
Posted by Barry Johnson (Member # 84) on January 07, 2010, 01:17 PM:
 
Its amazing what a bit of fiddling does re the above.Firstly,I have not removed the self load mechanism,just given it an intense clean and lubricated where neccessary and it actually works very efficiently!
Would still like to know if rwmoval of auroload is easily done though.......... [Roll Eyes]
 
Posted by John Hermes (Member # 1367) on January 07, 2010, 08:31 PM:
 
Bell & Howell autoloads thread very well when they are adjusted correctly and the film has a good leader.
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2