This is topic NATCO schematic in forum 16mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=5;t=000805

---

Posted by Barry Fritz (Member # 1865) on October 08, 2012, 05:08 PM:
 
Anybody know where I can get a schematic for NATCO model 3030 projector?
Thanks
 

---

Posted by Josef Grassmann (Member # 378) on May 16, 2016, 02:47 PM:
 
I´m also searching for NATCO circuit diagramms.
There is no serial number and no Model/ Type visible.
Tube amp will supply about 15 to 20 WATTS; I guess.
I`ll pay for it.

Thanks in advance
Josef
 

---

Posted by Barry Fritz (Member # 1865) on May 16, 2016, 11:11 PM:
 
I have schematics for the NATCO 3030 and the 3015. Does yours look like either of these?


 

---

Posted by Josef Grassmann (Member # 378) on May 17, 2016, 09:47 AM:
 
Hello Barry,
thanks for quick response and information that you own both.
First picture on top shows my projector, but large label with threading diagram and small label on arm are missing.
How much cost circuit diagramm?

Regards
Josef
 

---

Posted by Barry Fritz (Member # 1865) on May 17, 2016, 11:01 AM:
 
No cost Josef. If you can PM me your email, I can send you a PDF file of the diagram. It is a model 3015.
 

---

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC


UBB.classic^TM 6.3.1.2