This is topic Eiki SL 0 takeup problem in forum 16mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=5;t=000969
Posted by Brian Stearns (Member # 3792) on August 29, 2013, 05:51 PM:
 
The projector that I picked up recently,The take up is not working. So I opened the cover on the arm and noticed the bottom wheel moving but the belt is not,therefore the spindle is not moving. Just wondering do I need a new belt or is there a place to tighten it?

If I need a new take up arm belt where can I get one?

Thanks
Brian
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2