8mm Forum: Elmo 16-CL Squeaky Shutter

This is topic Elmo 16-CL Squeaky Shutter in forum 16mm Forum at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=5;t=001110

Posted by John Barbour (Member # 3777) on May 04, 2014, 11:25 PM:

Hi All,

I've got two Elmo 16-CLs that I'm in the process of cleaning up. I've taken care of the dreaded rubber roller goo, but now I'm dealing with a very noisy shutter in one of the projectors.

I've taken it apart, and it looks like the shutter belt is rubbing against the shutter.

Does anyone know if replacing the belt will solve this problem? The belt definitely could be replaced, as it's dry and worn. However, is it likely that something else is out of alignment as well, and if so, how difficult is that to fix? I've got access to the service manual, and the other projector seems fine, but it looks like a lot of parts removal to get to that belt.

Also, I've noticed that on the projector with the quiet belt, the belt has been installed teeth out, while on the squeaky projector the teeth are against the wheel. Is there a correct way?

Sorry for the long message. Thanks!

UBB.classic^TM 6.3.1.2