This is topic Reel prices help. in forum 16mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=5;t=001186

---

Posted by Elyas Tesfaye (Member # 3356) on October 15, 2014, 04:57 PM:
 
Hi all,

I have about ten 2,000 footer reels and was wondering how much these go for as I'm trying to part with them. Who better to ask than a very knowledgeable forum as ours ? Thanks again !!!

Elyas
 

---

Posted by Jim Schrader (Member # 9) on October 15, 2014, 08:21 PM:
 
Plastic or metal?
 

---

Posted by Elyas Tesfaye (Member # 3356) on October 15, 2014, 11:22 PM:
 
Just one is plastic... All metal ...
 

---

Posted by Maurice Leakey (Member # 916) on October 19, 2014, 10:28 AM:
 
Elyas
Spools are very hard to come by, you never know when you'll need extra ones. I suggest for the small amount of cash that you may get you should hang on to them.
 

---

Posted by Elyas Tesfaye (Member # 3356) on October 20, 2014, 11:10 AM:
 
Hi Maurice,

thanks for the advice, good sir, I already have made sure to keep back up reels... A chap ' s cominna scoop em up for CAN $ 3 a piece in a bit !!!

Elyas
 

---

Posted by Elyas Tesfaye (Member # 3356) on October 20, 2014, 12:30 PM:
 
Hi Maurice,

thanks for the advice, good sir, I already have made sure to keep back up reels... A chap ' s cominna scoop em up for CAN $ 3 a piece in a bit !!!

Elyas
 

---

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC


UBB.classic^TM 6.3.1.2