8mm Forum: Eiki EX 2000 N-2

This is topic Eiki EX 2000 N-2 in forum 16mm Forum at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=5;t=001225

Posted by Tom Dee (Member # 4468) on January 27, 2015, 11:25 AM:

I have the chance to buy one of these machines, but to be honest I dont really know that much about 16mm projectors. I would appreciate any info on this model, and also any problems that theses machines might of had and what to look out for.

Thanks
Tom

Posted by Elyas Tesfaye (Member # 3356) on February 03, 2015, 07:11 PM:

Hi Tom,

I don't know this particular model but based on the performance of my EIKI Super Slim Sloan Liam, I would bet it's a great work horse. In any case, I would take a reel to try it out in advance to see if it 7 running [Wink]

Best,
Elyas

Posted by Maurice Leakey (Member # 916) on February 04, 2015, 03:16 PM:

This projector is an up-market model with a high power xenon lamp. It gives a great light output but the downside is the very high cost of replacing the lamps.

If you are not really into 16mm sound I suggest you pass on this particular model.

Should you decide to start collecting 16mm films I suggest you look for a projector which uses lamps which are readily available and at a much lower cost.

Posted by Tom Dee (Member # 4468) on February 06, 2015, 08:39 PM:

Thanks Guys for the good info

Posted by Richard C Patchett (Member # 974) on February 07, 2015, 11:46 AM:

Greetings
If you need the service and parts manual
I have this in stock
There on my web site
#4407

EX2000-A&N
Includes the N series Service Manual and the 2000 N replacement parts list.
$35.00
RC

Posted by Roger Shunk (Member # 2836) on February 07, 2015, 06:58 PM:

Tom,
Sent you a PM
Roger

UBB.classic^TM 6.3.1.2