This is topic 16mm film loading error in forum 16mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=5;t=001350
Posted by Pablo Robertson (Member # 5098) on October 29, 2015, 06:53 PM:
 
I managed to load film in my Bolex 400 ft mag in the wrong direction, so it goes out of magazine anti-clockwise instead of clockwise, this means the wrong side of the film is being exposed at the gate. It was just one of those days. I wanted to know if anybody knows if I'll get anything from that film due to this error?
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2