This is topic Kodak Pageant AV-126-TR Exciter Lamp Issue in forum 16mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=5;t=001588
Posted by Douglas Warren (Member # 1047) on April 06, 2017, 04:48 PM:
 
I recently picked up two used Kodak Pageant AV-126-TR's from a local charity shop. Mechanically they work fine but the exciter lamp isn't working. It's not the bulb as I tried a brand new one from a fully working Pageant with the same results. When I push the amplifier switch nothing happens. Any thoughts / ideas / suggestions on what the problem might be? Thanks everyone!!!
 
Posted by Maurice Leakey (Member # 916) on April 07, 2017, 03:05 PM:
 
I would suggest that the trouble lies with the push type amplifier on/off switch. Perhaps its contacts are corroded.
 
Posted by Douglas Warren (Member # 1047) on April 08, 2017, 12:10 AM:
 
Thanks for the reply Maurice. I will definitely check that component out as a possible suspect.
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2