This is topic NT1 through an amp???? in forum 16mm Forum at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=5;t=001645
Posted by Tom Photiou (Member # 130) on July 25, 2017, 03:30 PM:
sorry to the 16mm vets on here, i think i enquired on this before but cant find the original post,
Am i able top put the NT1 via a simple pioneer stereo amp . As you know the only output is for the phono plug external speaker.
Posted by Maurice Leakey (Member # 916) on July 28, 2017, 03:26 AM:
Tom
I am not too sure about the NT1, but many Eiki/Elf models have an Auxiliary Output via the jack socket which is used for the external speaker connection.
However, a three ring (stereo) jack plug is required. Connections are to:-
The long sleeve section.
The small middle ring.
Ignore the small end tip.
Best of luck!
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2