8mm Forum: New to 16mm

This is topic New to 16mm in forum 16mm Forum at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=5;t=001769

Posted by Alex Wilson (Member # 6247) on February 27, 2018, 10:30 PM:

I own a sweet Elmo CL16 but I think I might need the rollers to be done, where and how can I do this, is there somewhere I can buy parts.. I live near Toronto Canada ....

Thanks for your patience with a newbie.... green as grass...

Posted by Maurice Leakey (Member # 916) on February 28, 2018, 02:53 AM:

Alex
Urbanski Film can supply:-
http://www.urbanskifilm.com/elmo.html

Posted by Richard C Patchett (Member # 974) on February 28, 2018, 10:10 AM:

Greetings
I also sell them
There on my web site with pictures
There all gold in color (shows 2 black )
RC

Posted by Barry Fritz (Member # 1865) on March 01, 2018, 02:10 PM:

I think if you Google it, you wiil find videos and articles on how to replace the rollers yourself.

Posted by Janice Glesser (Member # 2758) on March 01, 2018, 04:05 PM:

There's a section in this document (Pg. 6 & 7) on the Elmo 16CL. It describes where to buy the rollers and how to install.

https://amianet.org/wp-content/uploads/Resources-Small-Gauge-Projection-Workshop-2013.pdf

Posted by Winbert Hutahaean (Member # 58) on March 01, 2018, 07:56 PM:

Hi Alex,

Since you are new in 16mm, in case you need it, I can supply you with Elmoscope I (anamorphic/scope lens) as well as the bracket suits to Elmo 16CL

[Lot #3] NOS - Brand new Elmoscope I lens for sale eqv. with Sankor 16D

NOS Elmo bracket for scope lens. Free S/H to Europe

Nowadays, these two things are essential for screening 16mm films (due to later films are mostly shot in scope). They were not supplied when buying the projector new.

cheers,

UBB.classic^TM 6.3.1.2