8mm Forum: EIKI 16-CL anamorphic scope holders

This is topic EIKI 16-CL anamorphic scope holders in forum 16mm Forum at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=5;t=001805

Posted by Edwin van Eck (Member # 4690) on May 03, 2018, 06:14 AM:

Upon several requests from members of this forum we have developed a new (3d-printed) anamorphic (scope) lens holder for the ELMO 16-CL projectors.

For more info: https://shop.van-eck.net/PP-0243.html?_globalsearch=pp-0243

Anyone knows if this scope holder can also be used for other projectors?

Posted by Bill Brandenstein (Member # 892) on May 03, 2018, 12:36 PM:

Edwin, you never cease to amaze!

So folks, if you click at his link, you'll see there are multiple sizes available depending on the lens you're using.

However, how does it attach to the projector?

Posted by Maurice Leakey (Member # 916) on May 03, 2018, 02:37 PM:

It attaches as does the Elmo scope lens.
On the front of the projector are two holes, one above the other. The top hole is for a locating pin, the lower hole has a screwed thread into which the screw is inserted and tightened up.
If you go to the site you can enlarge the photos which show in more detail.

UBB.classic^TM 6.3.1.2