This is topic (SOLD) Telex instaload xl 16mm projector in forum 16mm equipment for sale/trade at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=7;t=000438

Posted by Adam Deierling (Member # 2307) on September 29, 2012, 04:45 PM:
 
Looking to sell my clean Telex Instaload XL projector. This machine runs fantastic with great optical sound. Have two spair bulbs to include. Has a 2 inch lens. Runs smooth. Asking $50 plus shipping. onedelorean@yahoo.com

 -

[ October 03, 2012, 08:45 AM: Message edited by: Adam Deierling ]
 
Posted by Adrian Winchester (Member # 248) on September 30, 2012, 01:24 PM:
 
I must admit that being in the UK, I'm not a prospective customer, but I can't help being a bit baffled by the price, considering what these sell for. You didn't intend to say $140 but left out a figure?
 
Posted by Adam Deierling (Member # 2307) on September 30, 2012, 02:52 PM:
 
Nope. Not looking to get rich. Only looking to get $40. Well worth the price to be honest. A very good running machine. And clean. I will probably have a picture up soon.
 
Posted by Michael O'Regan (Member # 938) on September 30, 2012, 03:11 PM:
 
Wow!

It's not for me to second guess anyone's pricing and I would never do it in a negative fashion but, I agree with Adrian - this is a remarkable price for such a machine.
 
Posted by Adam Deierling (Member # 2307) on October 02, 2012, 09:20 AM:
 
Here is another pic.

 -
 
Posted by Adrian Winchester (Member # 248) on October 02, 2012, 08:54 PM:
 
SOMEONE SNAP IT UP WHILE YOU STILL CAN! Just the spare lamps must be worth half the selling price!!!
 
Posted by Adam Deierling (Member # 2307) on October 15, 2012, 12:33 PM:
 
Bump...
 
Posted by Hugh Thompson Scott (Member # 2922) on October 15, 2012, 01:19 PM:
 
That's a lot of machine for very little Adam,I'm suprised it hasn't
been snapped up.
 
Posted by Adam Deierling (Member # 2307) on October 15, 2012, 06:50 PM:
 
I know. Most interest is coming from the UK and suspect they are afraid of shipping fees...I do need to sell as i could use the money!
 
Posted by Adrian Winchester (Member # 248) on October 16, 2012, 06:38 PM:
 
If you offer it on the 16mm Forum I expect it will go very fast. But I honestly think people can be put off by a low price, because if it's far below the usual market value, people might wonder why, even if you have made it clear that the projector works fine.
 
Posted by Adam Deierling (Member # 2307) on October 16, 2012, 06:48 PM:
 
I will try that. What would you suggest is a fair market price for it then?
 
Posted by Adrian Winchester (Member # 248) on October 17, 2012, 04:01 PM:
 
I can't claim to be an expert because I hadn't come across this model until you offered it here (they never seem to appear in the UK) but I found one sold on eBay recently and it went for something like $140 dollars. I'm wondering about the marks on the front casing as they would reduce the value somewhat as they damage the cosmetic appearance - or are they label residue that could be carefully cleaned off? If they could be removed, I'd try offering for around $140, considering you have spare lamps. Even if the marks are permanent, I'd still try a price of around $100. If it doesn't sell, you can always lower the price until it does.
 
Posted by Adam Deierling (Member # 2307) on October 17, 2012, 04:59 PM:
 
Its an old sticker. Can be removed. OK I will take your advice and try listing on the 16mm forum. Thanks for your help!
 
Posted by Richard J Greenberg (Member # 3136) on October 17, 2012, 07:52 PM:
 
I bought a Singer Telex 16mm projector on the 16mm forum for 70.00 plus shipping last year.Great machine.I have seen them sell for 50.00 to 150.00.Remember ebay will charge sales and paypal fees.Good luck
 
Posted by Adam Deierling (Member # 2307) on November 13, 2012, 05:04 PM:
 
Projector now SOLD!
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2