This is topic Long Play Unit in forum General Yak at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=8;t=000335
Posted by Graham Ritchie (Member # 559) on June 14, 2006, 11:42 PM:
![-](http://8mmforum.film-tech.com/cgi-bin/showpic.cgi?dir=uploads0503&file=2004_0229I5mage2.JPG)
![-](http://8mmforum.film-tech.com/cgi-bin/showpic.cgi?dir=uploads0503&file=2004_0229I3mage1.JPG)
Hi Everyone
I may have stuffed this up.
Here is a quick run down on the photo,s Its a clamp on unit I made years ago using an old Raynox projector { transformer, motor, variable speed control etc. ] I used in the old projection box which was only 40 inches long but had plenty of height, hence the position of the front reel. I also used 16mm B/H take up arm. The reels were made of Lexan, The most film I have had on it is about two and a half hours. The biggest surprise I had was that it actualy worked, and worked well Its unlikley it will be used in the future but if I did I will bring the front arm down to the same height as the rear
Graham
Posted by Kevin Faulkner (Member # 6) on June 15, 2006, 03:32 AM:
Awesome
Kev
Posted by Craig Hamilton (Member # 258) on June 15, 2006, 04:50 AM:
Jan will love this one
Craig
Posted by Paul Adsett (Member # 25) on June 15, 2006, 06:53 PM:
Holy cow Graham! Looks like you need a step ladder to load up that front reel!
Posted by Steve Klare (Member # 12) on June 15, 2006, 07:54 PM:
The lexan reels are awesome!
-like some holographic projector from the future!
(-maybe from the post-video Renaissance!)
Posted by Jan Bister (Member # 332) on June 15, 2006, 10:35 PM:
I do love it!! And those Lexan reels, too!!
Posted by Graham Ritchie (Member # 559) on April 20, 2011, 04:21 AM:
Its been years
since I last used it must get it out of mothballs.....I bet it still goes
Graham.
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2