8mm Forum: Help with Elmo 912S

This is topic Help with Elmo 912S in forum General Yak at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=8;t=001067

Posted by Steve Dalbec (Member # 1249) on October 30, 2008, 04:49 PM:

Just picked up an Elmo 912S, and I was under the impression it could handle 8mm size reels, but it appears to only handle the larger super 8.

Now it could be I am missing some caps that would slip over the spindles to allow the smaller reel hole to be used.

Can anyone tell me if this unit was design for the smaller reels. I have the owners manual and it does not mention it, but does say it handles both 8 and super 8.

Steve

Posted by Steve Dalbec (Member # 1249) on October 30, 2008, 07:17 PM:

Moved this to a 8mm equipment section instead.

UBB.classic^TM 6.3.1.2