This is topic I can't upload picture which is ony 60kb? in forum General Yak at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=8;t=001419

Posted by Winbert Hutahaean (Member # 58) on September 07, 2009, 09:06 PM:
 
I have a picture which is important to be attached with my next post.

I thought 60 kb for a jpg file is tiny enough for this forum. But I couldn't upload it!!

I compressed file to become 30kb, it worked with this forum, I could upload it but the result was all important details in the picture were gone.

So any help?
 
Posted by Douglas Meltzer (Member # 28) on September 16, 2009, 07:13 PM:
 
Winbert,

Sorry for the long delay in answering. Sometimes it's not the file size, but the picture pixel width. Is your picture wider than 550?

Doug
 
Posted by Winbert Hutahaean (Member # 58) on September 16, 2009, 08:39 PM:
 
Thanks Doug,

I don't know how to check the pixel. What I did just using Microsoft Paint and reduce the height and width.

But then when I reduced it to small, nothing can be read from the picture.

So, how can I check the pixel?

thanks
 
Posted by Dan Lail (Member # 18) on September 16, 2009, 11:12 PM:
 
Winbert, do you have Microsoft Photo Editor? If you do upload the picture there. Click on "image". Here you set the size in pixels.
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2