This is topic TMI in forum General Yak at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=8;t=002698

Posted by John Yapp (Member # 2873) on August 12, 2013, 06:21 PM:
 
Some people just don't know when to stop. I'm all for exhaustive details in a listing, but check this out..
http://www.ebay.co.uk/itm/Projector-/200952164852?pt=UK_Photography_VintagePhotography_VintagePhotoAccessories&hash=item2ec9aeb1f4
 
Posted by John Davis (Member # 1184) on August 12, 2013, 06:51 PM:
 
I turned the brightness up to max on my monitor and it turns out it's a picture of a toaster
 
Posted by Pasquale DAlessio (Member # 2052) on August 12, 2013, 07:32 PM:
 
2 slice or 4 slice?
 
Posted by Steve Klare (Member # 12) on August 12, 2013, 10:53 PM:
 
Maybe they're trying to tell us it needs a new lamp!
 
Posted by Hugh Thompson Scott (Member # 2922) on August 13, 2013, 03:52 AM:
 
Bolex did make a little std 8mm projector that does resemble a
toaster when the side cover is on, I have a Magnon,exactly the
same as the Bolex, but they are very small & compact,and easily
mistaken for that kitchen appliance.
 
Posted by Jonathan Trevithick (Member # 3066) on August 13, 2013, 04:01 AM:
 
I'm very excited about one of these. The only problem I could see with projecting bread is it would soon fade....to green.
 
Posted by Hugh Thompson Scott (Member # 2922) on August 13, 2013, 04:13 AM:
 
The trick is to get it "breaded up" correctly Jonathan,it stops it
burning in the gate.Self "Breaders" are to be avoided, they tend
to be a bit "crumby".
 
Posted by Jonathan Trevithick (Member # 3066) on August 13, 2013, 05:05 AM:
 
I can't buy one anyhow, Hugh. Lack of dough.
 
Posted by Hugh Thompson Scott (Member # 2922) on August 13, 2013, 06:42 AM:
 
Well done Jonathan, just like the toast, but not too "browned off"
I hope.
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2