This is topic Elmo repairs in forum General Yak at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=8;t=003632
Posted by Michael Hyde (Member # 748) on September 01, 2015, 08:04 AM:
Thanks Steve, by slow,i mean real slow,not even enough torque to feed film into gate,no signs of smoke or smells,was working fine till stored
Posted by Mathew James (Member # 4581) on September 01, 2015, 08:37 AM:
Have you check the belts? Maybe one is stretched...
btw- this thread is confusing....I see no history of conversation?
Posted by Andrew Woodcock (Member # 3260) on September 01, 2015, 08:43 AM:
Look under General Yak section Mathew.
There is a previous post called Elmo repairs, same as this one, in which Steve replied to Michael..then there was another post called repairs that was the first to this topic which I restored once the topic had been brought back to life by Michael.
Paul Browning has very kindly offered his help to Michael with this as he lives quite close by.
Posted by Steve Klare (Member # 12) on September 01, 2015, 11:40 AM:
I'm going to Elmo Repairs (the original)
This is getting complicated!
Posted by Douglas Meltzer (Member # 28) on September 01, 2015, 12:31 PM:
This topic continues here.
[ September 01, 2015, 08:24 PM: Message edited by: Douglas Meltzer ]
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2